Wall Construction
Wall framing, bracing, headers, and structural walls
Sections
Identification and Grade
Section R602.1 — Identification and Grade. Lumber used for load-bearing purposes shall be identified by a grade mark of a lumber grading or inspection agency approved by an accreditation body. Wall framing lumber shall comp...
Wall Bracing
Section R602.10 — Wall Bracing. All exterior walls shall be braced in accordance with this section or, when applicable, Section R602.12. Wall bracing shall be provided along each braced wall line as identified in...
Design and Construction
Section R602.3 — Design and Construction. Exterior walls of wood-frame construction shall be designed and constructed in accordance with this section and the applicable figures. Studs shall be continuous from sole plate to...
Windows
Windows shall be tested, labeled, and listed in accordance with AAMA/WDMA/CSA 101/I.S.2/A440. Windows in wind-borne debris regions require impact-resistant glazing or protection. Performance class shall be based on design wind speed and exposure category. Connecticut Long Island Sound coast may be classified as wind-borne debris region requiring enhanced glazing.
General (Windows)
Window installation requirements — manufacturer instructions, AAMA/WDMA/CSA testing, and design pressure ratings for wind.
Window Testing and Labeling
WINDOW LABELING - Must be tested and labeled with performance characteristics.
Window Testing and Labeling
Window labeling — must show AAMA/WDMA/CSA conformance and design pressure rating; impact resistance required in debris regions.
Anchorage Methods
WINDOW ANCHORAGE - Per manufacturer recommendations to achieve design pressure rating.
Window Installation
WINDOW INSTALLATION - Per manufacturer instructions. Sills must drain water to exterior.
General (Exterior Doors)
Exterior door installation — manufacturer instructions, AAMA/WDMA/CSA testing, and required head/jamb flashing.
Skylights and Sloped Glazing
Skylights and sloped glazing must meet safety glazing requirements of Section R308.
General Window Installation
Section R612.1 — General Window Installation. Windows shall be installed and flashed in accordance with the fenestration manufacturer's written installation instructions and the applicable provisions of this code. Windows shal...